584,800 active members*
4,822 visitors online*
Register for free
Login
IndustryArena Forum > CNC Electronics > Servo Motors / Drives > please rescue this noob :(
Results 1 to 3 of 3
  1. #1
    Join Date
    Mar 2019
    Posts
    3

    Unhappy please rescue this noob :(

    Hi there.

    This is tankdoctor, the noob in this forum.

    Anyway, to get to the point, I have a significant problem in conversion.

    I got lasma 443 cnc machine about 1 moth ago.

    It has 3 SIEMENS AC servo motor, and TNC 410 M PLC controller to control the motion.

    After I connect the line and put the power on, It doesn't moved.

    Check the parameter and checking again, finally I got the main problem : The program in the PLC 410 M is gone.

    So, I decided to change the controller, mach 3 interface controller board.

    However, lack of the technical data(mach 3 board connection example) making my conversion procedure stop.

    So, Please.......

    Help me.

    P.S. I e-mailed SIEMENS about the pin data of motors and searched mach 3 board connection of AC servo motors.
    Attached Thumbnails Attached Thumbnails 1FT6034-1AK71-3AH1.jpg   SIMODRIVE 611.jpg   mach 3 board.jpg  

  2. #2
    Join Date
    Apr 2017
    Posts
    16
    Hello! I've got some experience dealing with TNC 407 milling machine for 6 years, maybe the drives of the axis match.
    So you got a plasma machine that don't move...where you been able to traverse reference points or not?
    Can you send me a picture with the front pannel and screen of the machine?
    Lets fix it together.

  3. #3
    Join Date
    Mar 2019
    Posts
    3
    Quote Originally Posted by Fluckar View Post
    Hello! I've got some experience dealing with TNC 407 milling machine for 6 years, maybe the drives of the axis match.
    So you got a plasma machine that don't move...where you been able to traverse reference points or not?
    Can you send me a picture with the front pannel and screen of the machine?
    Lets fix it together.
    Thank you!

    I gonna post as soon as possible

    P.S.

    I gonna change the controller to mach3 interface board.

    Do you have any experience about that?

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •