Hi gays
I have a problem to setup buttons with mach3. I tried two different PC's and both the same (LPT ports).
I would like to use buttons for axis movement - X,Z. I set everything up but I have an issue, when I'am pressing left button - goes left but when I will take a finger of the button it is still going (seems like latching) won't stop - as long as hit limit switch or I will stop it by stop button. All buttons - directions the same.
Video of that https://www.youtube.com/watch?v=CUXeZAUzniI
All buttons set as OEM triggers
x++ -307
x-- -308
z++ -311
z-- -312
I tried to fit up/down buttons for Z axis on my milling machine and the same. I press up goes UP and wont stop too, the same DOWN. I have usb smoothstepper there so it is not problem with lpt. May be wrong configuration of mach3 but I have no idea where??
Thanks in advance and Best Regards Pav