Hi Everybody,

Switching out a machine from the old parallel port to the Ethernet SS with C25 BOB. CPU is talking with the board. got the Estop to function so I know the two are communicating.

When I power up the ESS and then boot up Mach 3 the lights on the output pins on the BOB all light up until I clear the E stop. I can see the numbers rise and fall on the DRO on the mach screen but no movement on the machine and the led's on the BOB should blink, at least the direction one. Nothing..

Checked the pin out settings for the motor, so far I'm stumped.

Thanks in advance!