[zman300]

Hello,

Have a Doosan VMC with the Fanuc 18i-MB control.
When loading a program from the laptop I get the 073 program number already in use alarm.
The program number is not in use.

What would cause this.

Thanks

[rcs60]

check the beginning of the program
one of the controls that i have looks pretty standard

%
O0273
the other one requires a space at the beginning of the program
(space here)
:1234

if it isn't correct it may do what you are saying

[zman300]

check the beginning of the program
one of the controls that i have looks pretty standard

%
O0273
the other one requires a space at the beginning of the program
(space here)
:1234

if it isn't correct it may do what you are saying

Thank you
That was the problem.
Working good now.

Thanks!!!!!!!