I refer to my topic in Vectric forum and need help in order to find out why my generated g-codes gives a different machining toolpath than it was shown in the v-carve softvare.
Vectric Forum • View topic - Is my 3D rotary toolpath wrong calculated?
Are there anybody here who can help me with this issue?
Results 1 to 1 of 1
-
03-05-2019, 05:04 AM #1
Registered
- Join Date
- May 2006
- Posts
- 309
Problem with rotary job toolpath. What may be wrong?
Reply With QuoteSimilar Threads
-
Toolpath on my Probotix Meteor Fireball is rotated wrong on the display.
By poolrod2 in forum Commercial CNC Wood RoutersReplies: 0Last Post: 09-01-2016, 09:47 AM -
Toolpath posts wrong
By jgarner77 in forum AlphacamReplies: 3Last Post: 12-09-2014, 11:23 PM -
What am I doing wrong here with 4th rotary toolpath!
By blakemachine in forum MastercamReplies: 9Last Post: 06-19-2012, 11:33 AM -
ROTARY TOOLPATH
By dpark1 in forum MastercamReplies: 9Last Post: 04-09-2008, 09:15 PM -
toolpath using rotary axis
By dpark1 in forum MastercamReplies: 3Last Post: 09-04-2007, 12:42 PM
Tags for this Thread
Posting Permissions
