Hello,
We just bought a Kira VTC30E (1996 year) vertical machining center with Fanuc 21 control and today I have been playing with it first time. I found a problem with the tool indexing. Below is the list of the positions in the ATC:
1 2 3 4 5 6 7 8 9 10
But machine is indexing the positions as
1 10 9 8 7 6 5 4 3 2
So when I call to T3 the machine loads T9, when I call T7 then T5 is loaded instead etc.
Any idea of where the problem could be and how to solve it?
Thanks in advance!