585,722 active members*
4,565 visitors online*
Register for free
Login

Thread: Help

Results 1 to 4 of 4
  1. 03-05-2019, 08:33 PM #1
    picchio120
    picchio120 is offline Registered
    Join Date
    Nov 2016
    Posts
    9

    Help

    Hi you have the configuration file for laser rabbit 1290SE had a leetro 6515 card now mounts rdc6442g thanks
    Reply With Quote Reply With Quote
  2. 03-06-2019, 11:25 AM #2
    picchio120
    picchio120 is offline Registered
    Join Date
    Nov 2016
    Posts
    9

    Re: Help

    Non c'è nessuno che possa aiutarmi
    grazie
    Reply With Quote Reply With Quote
  3. 04-22-2019, 02:53 AM #3
    rayscott
    rayscott is offline Registered
    Join Date
    Apr 2006
    Posts
    108

    Re: Help..

    C'è sempre qualcuno che può aiutare

    Vendor Settings password "rd8888"
    The easiest method is to set each parameter in the "vendor settings"

    X-axis step 7.9375 um
    Y-axis step 7.9375 um
    Z-axis step size should be near 0.25 um

    if you need special help, I can connect to your PC and step through the process.

    I loved my time when I lived in italy.

    Ray Scott
    Rabbit Laser USA
    Reply With Quote Reply With Quote
  4. 04-23-2019, 09:32 AM #4
    picchio120
    picchio120 is offline Registered
    Join Date
    Nov 2016
    Posts
    9

    Re: Help

    Thank you very much Rayscott for making good I will surely bother you again thanks Regards Gennaro
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules