Hi
I am looking for some ideas on how to automate taking a 20 foot stick of 2x3 angle steel and creating 120 six inch pieces with a hole on each end.
any ideas on where i should look
and thank you for your help
Jeremy
Hi
I am looking for some ideas on how to automate taking a 20 foot stick of 2x3 angle steel and creating 120 six inch pieces with a hole on each end.
any ideas on where i should look
and thank you for your help
Jeremy
What sort of machinery do you have or are you looking for ideas on what sort of machine to use to do this with?
i am looking for new machinery. i have a piranha and some band saws now. I am trying to automate this and delete a position and up production i just don't know where to look for something that can do both of these steps in one system.
Check out Amada Machine Tools - I believe they have that type of equipment available. www.amadamt.com
thanks for your help guys ... i found out yesterday that the machine that i need is called an angle line or beam line check them out they are pretty cool