[deadlykitten]

hello all, please, how to achieve oriented M axis, for milling and turning ? genos osp300L

i wish to :

    index turret + M110  + approach + index M axis at specific angle + feed movement with M axis oriented
    index turret + G97 S + approach + index M axis at specific angle + feed movement with M axis oriented

is there a " M zero shift " ( or something similar ), so to vanish this modification when cnc is reseted, so to avoid indexing the turret with wrong M spindle phase ? kindly

[Vercetti]

please subscribe to my youtube channel.. i just posted on my G-code CNC PCB milling https://youtu.be/CNIyHB7awX4

[deadlykitten]

what g-code delivers 'orientat' for M axis ? pls check attached image

at this position, i can't rotate the tool by hand, thus there is kind of a break; M phase is 300degrees, and when turret is indexing, M phase is changing from 300 to circa 245; i achieved the 'orientat' state by using G296, and the phase angle by editing " system para \ M orient offset ", but the break is delivered by the G296 cycle, not by pure g-code

also, i can not insert g-code after the moment when M axis is oriented ... after G296 executes, there is the G180, and at that moment rpm is restored ?!

M110
M146 M15
G00 X30 Z2.5 T0505 SB=500
C90
G296 X30 Z-5 C90 K0 F0.567 E2.8 HS=-0.02 G95 (*1)
G180 (*2)
G00 X30 Z2.5
M12
M109
G00 X500 Z200 T0500

(
  i wish to insert code after the moment when M axis reaches ' orientat ' state
  M axis get 'orientat' during executing line *1
  G296 cycle is canceled by G180, and when G180 is executed, rpm is restored
  i can't insert code between G296 and G180, because it will be interpreted as a new position where G296 should be repeated 
)

kindly

[deadlykitten]

hello past self of my self M229 CB=10; does not need M110, thus m spindle orientation is not dependant on c axis state

[Sencillo]

hello past self of my self M229 CB=10; does not need M110, thus m spindle orientation is not dependant on c axis state

I LOVE YOU INTERNET STRANGER. CHEERS. I NEEDED THIS TODAY AND YOU THE ONLY SOURCE THAT HELPED. YOU HAVE NO IDEA HOW GREATFULL I AM.

[RaderSidetrack]

:banana:

[deadlykitten]

I LOVE YOU INTERNET STRANGER. CHEERS. I NEEDED THIS TODAY AND YOU THE ONLY SOURCE THAT HELPED. YOU HAVE NO IDEA HOW GREATFULL I AM.

hy sencillo love you 2, haha

if i may, why do you needed it ? do you need something else ? kindly

ps : hy ridersidetrack

[deadlykitten]

I LOVE YOU INTERNET STRANGER. CHEERS. I NEEDED THIS TODAY AND YOU THE ONLY SOURCE THAT HELPED. YOU HAVE NO IDEA HOW GREATFULL I AM

hy sencillo love you 2, haha

if i may, why do you needed it ? do you need something else ? kindly

ps : hy ridersidetrack