502,326 active members
6,352 visitors online
Register for free
Login

Thread: mach3 notice

Results 1 to 3 of 3
  1. #1
    Registered
    Join Date
    Sep 2010
    Posts
    43

    mach3 notice

    When I start and close the mach3 program, a notification is silenced:
    xmlnetprofile
    load waring- ,hexadecimal value 0x0C,is invalid character. line1 position400

    Attachment 415498

    Where should I look for a mistake?

  2. #2
    Community Moderator ger21's Avatar
    Join Date
    Mar 2003
    Posts
    33797

    Re: mach3 notice

    Did you try to edit the .xml with another program?
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

  3. #3
    Registered
    Join Date
    Sep 2010
    Posts
    43

    Re: mach3 notice

    No, I just copied copies of my profiles that I saved.

Similar Threads

  1. A-CNC-G NOTICE
    By rgee in forum Australia, New Zealand Club house
    Replies: 0
    Last Post: 08-26-2009, 09:41 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •