584,814 active members*
5,169 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Apr 2018
    Posts
    5

    LUBE Pump - Help

    I have a Willy-Vogel (122 024 510) lubrication pump that I have all intentions on using. I contacted VOGEL an the pump has been discontinued and can not help. Does anyone have a schematic or explanation of how this is wired? There are 2 cables coming out of the unit. One is power (3 conductor) which I am able to trace easily enough and I assume the other is control (2 conductor) or pressure switch, but I don't know for sure. The cable goes into a boot and I don't want to try going into if I don't have too. Any insight of the unit is greatly appreciated.

  2. #2
    Join Date
    Feb 2009
    Posts
    6028

    Re: LUBE Pump - Help

    Probably a float switch. Stick a meter on the 2 and turn the pump upside down and right side up. Circuit should close and open.

Similar Threads

  1. Leaking Lube Pump
    By dkaustin in forum Tormach Personal CNC Mill
    Replies: 5
    Last Post: 04-13-2013, 02:18 AM
  2. Lube pump
    By TarHeelTom in forum LinuxCNC (formerly EMC2)
    Replies: 3
    Last Post: 02-26-2012, 06:14 PM
  3. re Spindle Lube and Lube Pump
    By robkuhi in forum Tree
    Replies: 15
    Last Post: 10-24-2011, 06:49 PM
  4. Lube pump
    By TarHeelTom in forum Bridgeport / Hardinge Mills
    Replies: 13
    Last Post: 08-19-2010, 06:48 AM
  5. Auto Lube pump?
    By cncuser1 in forum Syil Products
    Replies: 0
    Last Post: 05-04-2008, 10:19 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •