549,835 active members*
2,952 visitors online*
Register for free
Results 1 to 1 of 1
  1. #1
    Join Date
    Mar 2019

    TRUMPF PLC Error code 07117000

    Today, I was cutting 3.2mm AL sheet metal. I had measuring turned off in the technology correction configuration for the program I was running (only a partial sheet was being used) And the cutting head ran off of the sheet. I was given a general collision alarm, so I cleared the obstruction. When I attempted to bring the cutting head back into the reference position, I was given another PLC alarm with error code 07117000 stating "Laser Evacuation Malfunction!" which gave the description of the motor having been overloaded, and the circuit breaker was tripped.
    I am running a TRUMPF TruLaser 5030 Fiber (L41) with LMC and TruDisk 3001. I am not able to home position, nor clear the error. I have checked the main switches as well as the Siemens switches in the cabinets of both the laser and the TruDisk 3001. None of them were in the tripped position. Restarting the machine does not fix the error.

  2. #2

    Join Date
    Mar 2019

    Re: TRUMPF PLC Error code 07117000

    It could be problem with encoder on step motor!? had similar problem on old Trumpf 260R.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts