585,932 active members*
3,684 visitors online*
Register for free
Login

Thread: Torq cut 22 tool unclamp issue

Results 1 to 2 of 2
  1. 03-12-2019, 10:33 PM #1
    Lary Alvey
    Lary Alvey is offline Registered
    Join Date
    Jan 2010
    Posts
    11

    Torq cut 22 tool unclamp issue

    I have a 1996 torq-cut 22 that will no longer turn loose of the tool holder in the spindle.
    neither by the eject button or tool change command. This started several months ago
    but I could get it to work by pressing the eject button several times then it ran fine until the next time I powered up the machine.
    But now it wont let go.
    Has any one else had this problem?

    Thanx Lary Alvey
    Reply With Quote Reply With Quote
  2. 03-13-2019, 02:55 PM #2
    mactec54
    mactec54 is offline Member
    Join Date
    Jan 2005
    Posts
    15362

    Re: Torq cut 22 tool unclamp issue

    Quote Originally Posted by Lary Alvey View Post
    I have a 1996 torq-cut 22 that will no longer turn loose of the tool holder in the spindle.
    neither by the eject button or tool change command. This started several months ago
    but I could get it to work by pressing the eject button several times then it ran fine until the next time I powered up the machine.
    But now it wont let go.
    Has any one else had this problem?

    Thanx Lary Alvey
    Check all the air valves, are you using dry air
    Mactec54
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Mazak V7.5 Clamp/Unclamp Issue
    By dbrus38 in forum Uncategorised MetalWorking Machines
    Replies: 2
    Last Post: 11-25-2012, 12:33 PM
  2. Torq cut tc3 issue - BMDC??
    By scrap maker in forum Bridgeport / Hardinge Mills
    Replies: 3
    Last Post: 09-04-2012, 03:33 PM
  3. mazatrol tool unclamp
    By bigbobr in forum Mazak, Mitsubishi, Mazatrol
    Replies: 1
    Last Post: 04-04-2012, 02:48 PM
  4. Bridgeport Torq Cut 3g spindle speed issue
    By scrap maker in forum Bridgeport / Hardinge Mills
    Replies: 6
    Last Post: 04-19-2011, 03:05 PM
  5. Tool unclamp fault
    By IMlearnin in forum Daewoo/Doosan
    Replies: 2
    Last Post: 06-08-2007, 02:40 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules