Hi everybody,
I started my machine this morning and I see all the lights lit for all axis on the pendant (see screen shot).
I remove the cards from the pc, cleaned them and put back in. Still no change.
any help greatly appreciated.
Henry
Hi everybody,
I started my machine this morning and I see all the lights lit for all axis on the pendant (see screen shot).
I remove the cards from the pc, cleaned them and put back in. Still no change.
any help greatly appreciated.
Henry
Hello
You turn out machkne and turn on again.
If yes and same i think plc out signal sending if you cleaned everything
Išsi?sta naudojantis SM-G960F Tapatalk 4 Lt
Hurco BMC 2416