Looking for anyone who added a turret to their Slant Pro after they had been using just gang tooling. Basically, was it worth it? I keep going back and forth on should I add the ATC or not. Sure would be nice to have some standard tools loaded at all times. I watched Cliffs video on how the turret gets you close but you will still have to dial in the tools each run if you want accuracy. I'm okay with that, seems like it would be better than a full setup. I know I'll have to take the enclosure off but that's okay, I had been needing to take it off anyway to do a better job of caulking and sealing the damn colander.
So.... Post up your thoughts. Right now I'm leaning towards adding the turret as the first of my 2019 upgrades plan.
Thanks,
Awall
Results 1 to 2 of 2
-
03-19-2019, 12:37 PM #1
Registered
- Join Date
- Oct 2010
- Posts
- 670
Turret for the Slant Pro - Pros / Cons
The Body Armor Dude - Andrew
-
03-06-2020, 11:37 PM #2
Registered
- Join Date
- Nov 2014
- Posts
- 17
Re: Turret for the Slant Pro - Pros / Cons
Wow, too bad nobody ever commented on this. Did you ever upgrade to the Turret?
Reply With QuoteSimilar Threads
-
ViaCAD Pros & Cons
By CNC_Kid in forum ViaCad / SharkReplies: 1Last Post: 02-21-2014, 09:14 PM -
Pros and Cons
By SB2C-1 in forum SurfcamReplies: 3Last Post: 12-13-2010, 11:48 PM -
Pros and Cons of X4, CNC Jr...
By timberwolf5480 in forum Benchtop MachinesReplies: 19Last Post: 04-16-2009, 04:46 AM -
pros and cons
By stirling in forum Stepper Motors / DrivesReplies: 9Last Post: 08-28-2007, 03:40 PM -
What are the pros and cons of
By cncadmin in forum CNC Machining CentersReplies: 1Last Post: 05-19-2003, 06:31 AM
Tags for this Thread
Posting Permissions
