585,753 active members*
4,020 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Fanuc > 0i-TC #1202 Parameter help, reset set work coordinates back to G54

Thread: 0i-TC #1202 Parameter help, reset set work coordinates back to G54

Results 1 to 3 of 3
  1. 03-29-2019, 03:53 PM #1
    ONyX557
    ONyX557 is offline Registered
    Join Date
    Mar 2018
    Posts
    8

    0i-TC #1202 Parameter help, reset set work coordinates back to G54

    Hi guys I just got 2 hwacheon lathes, hi techs. The small one has a 0i-TC controller and when you hit reset it changes the work set back to G54. We need to change it so that the current work set stays modul. I have found that #1201.7 = 0 should do that but it doesn't on both these machines. Also bit 7 isnt labeled WZR like it should be. Is this setting in a different parameter on this controller? All the rest of the Pumas we have in the shop are all set to = 0 and work fine.
    Thanks for nay help
    Reply With Quote Reply With Quote
  2. 03-29-2019, 04:27 PM #2
    dcoupar
    dcoupar is offline Gold Member
    Send a message via AIM to dcoupar Send a message via MSN to dcoupar
    Join Date
    Mar 2003
    Posts
    2932

    Re: 0i-TC #1202 Parameter help, reset set work coordinates back to G54

    The 0iT-C parameter manual I have shows WZR as being bit 7 in parameter #1201, not #1202.
    Attached Thumbnails Attached Thumbnails WZR Parameter.JPG  
    Reply With Quote Reply With Quote
  3. 03-29-2019, 05:24 PM #3
    ONyX557
    ONyX557 is offline Registered
    Join Date
    Mar 2018
    Posts
    8
    Quote Originally Posted by dcoupar View Post
    The 0iT-C parameter manual I have shows WZR as being bit 7 in parameter #1201, not #1202.
    Sorry that was my typo. I ment 1201.7
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. nc studio how to set 'soft' machine coordinates back to zero
    By alceli in forum Commercial CNC Wood Routers
    Replies: 0
    Last Post: 02-03-2016, 05:47 AM
  2. Work Planes / Work Coordinates
    By MICFDI in forum Esprit
    Replies: 11
    Last Post: 10-04-2014, 02:41 PM
  3. How do you set your X & Y work coordinates?
    By RicknBeachcrest in forum DIY CNC Router Table Machines
    Replies: 4
    Last Post: 11-26-2013, 08:51 PM
  4. How to use work coordinates
    By desellers in forum Haas Lathes
    Replies: 3
    Last Post: 06-24-2013, 02:28 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules