Hi people I have an Isacon Power Control Tech A2 VFD running a 2.2kw 400hz water cooled spindle, I am thinking the VFD is a rebadged AskPower but not sure, I ran it a few times short spurts no load as I don't want to run it without the right settings.
(Australia is 220V and 50Hz)
Config parameters all start with PN, I am not having much luck finding any setup configs hoping someone can point me in the right direction seems like there is a surplus of these in Australia at the moment.
Eventually, I want to have mach3 control and have found a post on the old forum for wiring if it is an askpower but can't access the wiring diagram logon won't work :-(
I have a g540 as well as and external cheapy Bob
Just not having much luck.
Hopefully i have placed this in the right place.