[stroked64c20]

Hello, It is time for me to let this thing go to someone that will use it.

I have had this mill for about 6 years now and used it twice. I bought it used from a school that used it on plastics and has a large number of spare parts. I converted it to run on mach 3 on ethernet smoothstepper communications.

weighs about 700ish lbs?
Located near Normal, Illinois

-computer with mach 3.
-many many spare parts
-decent amount of tooling
-10+ bt30
-hand pendant
-will include 5 gallon bucket of new coolant mix I never opened

ask me questions.

Video available.

[stroked64c20]

obo

[stroked64c20]

bumper. make offer

[CNC-Joe]

Is it running? Can you do tool changes?

[stroked64c20]

yes is it running and it is not automatic tool changes but there is a lever you can manually change out the BT30 holders, shown in the pictures.

[Dominic49]

yes is it running and it is not automatic tool changes but there is a lever you can manually change out the BT30 holders, shown in the pictures.

how wide is it? would it fit through a doorway?

[stroked64c20]

28wide x40deep x45 high and the oiler is the widest part.

[stroked64c20]

~sold~