584,849 active members*
3,889 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > EMCO CNC Machines > EMCO Lathe > Looking for a Copy of the Electrical diagrams for an EMCOturn 220p with TM02 control
Results 1 to 4 of 4
  1. #1
    Join Date
    May 2006
    Posts
    14

    Looking for a Copy of the Electrical diagrams for an EMCOturn 220p with TM02 control

    I am looking for the electrical diagrams for a EMCOturn 220p with the Tm02 control, I have the 120p diagrams and there are a number of wires that are in different locations on the 220p machine.

    Any help is appreciated,

  2. #2
    Join Date
    Jan 2005
    Posts
    15362

    Re: Looking for a Copy of the Electrical diagrams for an EMCOturn 220p with TM02 cont

    Quote Originally Posted by dickins11 View Post
    I am looking for the electrical diagrams for a EMCOturn 220p with the Tm02 control, I have the 120p diagrams and there are a number of wires that are in different locations on the 220p machine.

    Any help is appreciated,
    Have you tried EMCO they usually have this for there machines, but some of the older machines they may not
    Mactec54

  3. #3
    Join Date
    Apr 2018
    Posts
    5

    Re: Looking for a Copy of the Electrical diagrams for an EMCOturn 220p with TM02 cont

    Quote Originally Posted by dickins11 View Post
    I am looking for the electrical diagrams for a EMCOturn 220p with the Tm02 control, I have the 120p diagrams and there are a number of wires that are in different locations on the 220p machine.

    Any help is appreciated,
    I have a set for a T01 control. Dont know if there is any diffrenece

  4. #4
    Join Date
    May 2006
    Posts
    14

    Re: Looking for a Copy of the Electrical diagrams for an EMCOturn 220p with TM02 cont

    Yes, when i supplied them with the machine number, i was given a maintenance manual and the wiring diagrams for a 120 sd/t. I am beginning to think that the previous owner(s) ran wires to replace damaged and burned out wires in the control.

    Maintenance manual is for the 220P.

Similar Threads

  1. electrical diagrams
    By rjmachine in forum Kitamura
    Replies: 3
    Last Post: 06-26-2021, 04:36 PM
  2. Emcoturn 242 w,TM02 cannot access R-parameters
    By Oviksnc in forum EMCO CNC Machines
    Replies: 0
    Last Post: 09-04-2016, 10:22 PM
  3. Emcoturn 242 w, Emcotronic TM02 RS232?
    By Oviksnc in forum EMCO CNC Machines
    Replies: 0
    Last Post: 10-28-2015, 02:27 PM
  4. Replies: 1
    Last Post: 06-07-2013, 04:26 AM
  5. Parting TM02 Control from Emcoturn 140/240
    By Marty_Escarcega in forum EMCO Lathe
    Replies: 2
    Last Post: 12-31-2012, 01:55 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •