Fired up a new to me Partner 1F last night and have some issues. The previous owner had it running on single phase 220 but i'm not sure if he ever cut any chips with it. I have it running 1 ph 220 on L1 and L3. I was going to indicate in the vices and noticed the machine actually moves twice what the display is telling me. In handwheel i click it .001 and it indicates .002". Move it .100 on the control and it actually moves .200. Looked in the axis parameters and the encoders are set to 1000 pulses and the scale factor is 1.000. Any thoughts?