584,808 active members*
5,007 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > Mastercam > Post Processors for MC > Add N10/N20/etc with space between operation
Results 1 to 2 of 2
  1. #1
    Join Date
    Sep 2010
    Posts
    135

    Add N10/N20/etc with space between operation

    Hello,

    How can I generate a N10/N20/N30 before each operation?
    also, a space between operations.

    see example below... my other post generates N20 before the second operation.

    M09
    M05
    G53Z4.96
    G53X-260.Y0.
    M01




    N20
    (TOOLPLANE NAME - TOP)
    T11M06(0.42 MM DRILL CARB MIQUDRILL MIKRON)
    (MAX - Z5.)
    (MIN - Z-1.5)
    G17G21G40G80G90
    G54
    S25000M03


    thanks in advance

  2. #2
    Join Date
    Jan 2019
    Posts
    74
    n_op = op_count * 10
    *n_op

    I prefer to make the N number the same as the tool number
    n_op = t$
    *n_op
    Last edited by CadCamSam; 03-29-2019 at 08:56 PM.

Similar Threads

  1. code for actual operation accordingly to next operation
    By deadlykitten in forum Uncategorised CAM Discussion
    Replies: 1
    Last Post: 02-08-2017, 07:13 PM
  2. Space planning
    By Automate-It-All in forum Tormach Personal CNC Mill
    Replies: 3
    Last Post: 03-30-2016, 10:22 PM
  3. Need a space for my machines
    By vvdesignsshop in forum Community Club House
    Replies: 0
    Last Post: 02-11-2014, 12:27 AM
  4. Need more space
    By air2gnd in forum OpenSource Software
    Replies: 4
    Last Post: 11-15-2012, 01:30 AM
  5. Paper space Model space ??
    By cncadmin in forum Autodesk
    Replies: 10
    Last Post: 05-29-2003, 12:07 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •