Been adding components to my cnc and it's definitely not organized in a way that I'm happy with. Right now I have a g540, smoothstepper, 48v psu, 2.2kw vfd, couple small psu's for 5v, 12v psu for air solenoids, and now adding a breakout board, dmm dyn4 drive, contactor, line reactor, filters, etc with more lines for a.c. power, more wires going back and forth. Just gonna be a mess if I try to add on to my current setup. I started out with a small control box that housed the 48v psi and g540 with the smoothstepper mounted to the outside with protective plexiglass cover, but now it's just becoming too much. Need to start fresh with a proper control cabinet now that I'm adding the dmm stuff for mill turn. Just want everything to be clean and organized. Anyone have ideas of how to handle all this neatly? Preferably some pics of your own setup with maybe some similar components?