584,829 active members*
4,942 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Fanuc > Feeler Mill QM22 - Fanuc O-MD Control - Error 1330 MAG CTR SENSOR ERROR
Results 1 to 2 of 2
  1. #1
    Join Date
    Sep 2009
    Posts
    75

    Feeler Mill QM22 - Fanuc O-MD Control - Error 1330 MAG CTR SENSOR ERROR

    Hello,

    Not sure what has happened to my machine, but after cycling the ATC to clean it up it landed on "standby" tool 5 and threw up that alarm. We are unable to clear the alarm and it has locked up the machine from doing anything.

    We have taken the covers off to inquire with the ATC to see what is going on, but we are not sure what to do to clear this alarm.

    Please help!

  2. #2
    Join Date
    Feb 2012
    Posts
    126

    Re: Feeler Mill QM22 - Fanuc O-MD Control - Error 1330 MAG CTR SENSOR ERROR

    Not to sound dumb, but did you look for a mag sensor/s to see if it/they have chips or anything on it? Are you cleaning with compressed air? That would be a likely culprit. Or else test it some how? It must use that sensor to Keep track of the positions of the tool changer. There are probably several different ones in there. Do you have any documentation of the wiring or ladder for the machine? What do you mean by "standby" tool? Is there a tool currently in the spindle?

Similar Threads

  1. Replies: 5
    Last Post: 04-20-2019, 02:31 PM
  2. Replies: 0
    Last Post: 05-05-2013, 05:40 AM
  3. Omag cnc mill error code, num control
    By jeff2005 in forum Controller & Computer Solutions
    Replies: 1
    Last Post: 03-10-2010, 11:51 PM
  4. Fanuc Magnetic Sensor Error
    By symage in forum Uncategorised MetalWorking Machines
    Replies: 1
    Last Post: 03-07-2007, 11:02 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •