585,589 active members*
2,898 visitors online*
Register for free
Login
IndustryArena Forum > Manufacturing Processes > Milling > Mori Seiki MH-63/80 Tool Change Help

Thread: Mori Seiki MH-63/80 Tool Change Help

Results 1 to 2 of 2
  1. 04-02-2019, 10:13 PM #1
    Craiggy1983
    Craiggy1983 is offline Member
    Join Date
    Apr 2019
    Posts
    1

    Mori Seiki MH-63/80 Tool Change Help

    Hey All,

    I was wondering if you guys could help me out. I am not familiar at all with this machine. If I command an M06T04 command it will put tool 4 in the waiting pocket. If I then command say M06T05 next, it will put that in the waiting pocket and tool 4 in the spindle. Is there one T command or a parameter that would allow us to perform one T command to put a tool in the spindle? For example M06T04? I was thinking about trying M06T04T04 but haven't had the chance to try that yet.

    Thank You,

    Craig
    Reply With Quote Reply With Quote
  2. 04-03-2019, 02:36 PM #2
    CadCamSam
    CadCamSam is offline Member
    Join Date
    Jan 2019
    Posts
    74
    T04;(tool wait position)
    M06; (tool change)
    g0 g90g54x0y0s500m3t05;(prestage next tool while positioning and turning on spindle)

    What you are doing is calling a tool change before a tool is in position. position the tool first. then tool change.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules