Hello. I have a Tool changer issue on my Daewoo ace v50. Side mount tool changer. The machine is new to me. But sat for quite a while before i got it going again.
My trouble is the tool changer doesnt finish a full cycle all the time. at first it was every other tool. it will change tools and swing arm doesnt quite make it back to home position and tool pot only makes it back up to about 45deg. It alarms out in same spot every time it does it. I tried with no tools in the spindle, and also with pot removed in the magazine. Thinking maybe the claw that moves the pot up and down was out of alignment and was jamming up. It did about 15 tool changes in a row this way with no alrms. so i put tool pot back in the magazine and aligned the up/down claw a little and then tried a few more tool changes. then i got about 6 tool changes before it alarmed out in the exact same position. so i took the tool Pot back out and tried it again. after about 6 tool changes it alarmed out again.
To reset the Alarm every time this happens. I need to manualy crank the tool change motor to finish the cycle, and make prox swithes and its good to go again. I lubed up the chain that drives it and that didnt help either. Now im trying to figure out if its the Motor or something in the Cam tool change Box. Does any one hear have any idea what i can try to trouble shoot this problem.
Thanks, Scott