Attachment 416768
Attachment 416770
Attachment 416772
Almost all the parts have been made in the machine shop.
My main concern right now, right before assembly is whether the G540 and 400 oz in stepper motors running on a 1/2" 5 start .1 pitch ACME drive will have the power to push the moving parts. It is designed mostly to cut signs out of cedar using shallow cuts.
Attachment 416774
Attachment 416776
Attachment 416778
One thing that's missing is a spindle mount, does anyone have a line on one of those? It's the Chinese VFD 80 mm OD 2.2 kw Air cooled