Hi All,

I'm looking to build a lathe, basically a clone of an Emco 220p.

I already have the spindle / pneumatic chuck closer / chuck from a 220p on the way and I think I've found a turret for it.

I'm looking to find the slanted bed, Z axis saddle, X axis plate where the turret mounts with ballscrews and motor mounts from an Emco 220p which has been stripped - Must be in good usable condition. I'd also be interested in some of the enclosure panels, especially the sliding covers which connect to the saddle and turret mount.

Basically looking for the stuff in this picture, without the lower coolant / chip tray, spindle and motor:
http://www.dieselrc.com/projects/emcocompact6/022.jpg

I'm in the UK so ideally something close to reduce shipping and import taxes, but I don't mind importing if the price is low enough. There are a few spindles and turrets going for these from time to time, so there must be a few machines which have been stripped with the bed being available.