Hello all,
I can't seem to figure out how to peck tapping on the robodrill Fanuc a-D21L iA5 control.
my other Fanuc does pecking tapping with G94 M29, with PITCH X RPM = FEED...
but on this machine I wanted to just use the pitch...
example below
(M7x1 XXXX TAPRH)
M29 S300
G98 G84 Z-10. R10. Q3. F1.
I find it way simpler because 90% of the jobs are in mellimeters.
Anyone please tell me what would be the proper way of doing this pecking tapping cycle?
thanks