500,454 active members
7,653 visitors online
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Registered
    Join Date
    Nov 2016
    Posts
    6

    Mazak New Turbo-X48 Champion Buying

    Hi

    I’m considering buying a 1999 Mazak New Turbo-X48 Champion to replace my Swiftcut plasma machine, which whilst capable can’t do some of the finer work I need to cut. What do I need to consider about buying a second hand machine particularly of that age? Secondly does anyone have an operating manual they can share with me so I can get an idea about it? Thirdly, what’s the approved lifting method please?

    Thanks

    Andrew


    Sent from my iPhone using Tapatalk

  2. #2
    Member
    Join Date
    May 2019
    Posts
    4
    have you bought? manual should give you with the equipment. when you bought to make sure it works,
    I have been struggling for 5 months to start, and I have not yet

Similar Threads

  1. 1990 Mazak LaserPath Turbo-X48
    By Mykal Ward in forum General Laser Engraving / Cutting Machine Discussion
    Replies: 8
    Last Post: 07-22-2016, 07:17 AM
  2. Mazak super turbo X48 - L-32 problem
    By borteh in forum Mazak, Mitsubishi, Mazatrol
    Replies: 0
    Last Post: 12-13-2015, 08:43 PM
  3. Mazak Turbo X48 Parameter Issue
    By Japazo in forum General Laser Engraving / Cutting Machine Discussion
    Replies: 1
    Last Post: 12-27-2010, 02:50 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •