584,812 active members*
5,484 visitors online*
Register for free
Login
Results 1 to 5 of 5
  1. #1
    Join Date
    May 2018
    Posts
    30

    problem mach3

    hello, sorry for the translation
    . I am looking for an advice with cnc I have this CNC machine OpenBuilds OX cnc my problem is that with arduino works well at 95%
    But I decided to change to mach3 and I can not configure mach3
    NEMA 23 The interface of engine + mach3 + tb6600
    I already tried several configurations, but the engine does not respond, what can I do.
    Thank you

  2. #2
    Join Date
    Apr 2005
    Posts
    304

    Re: problem mach3

    Which operating system do you run on your computer?
    Make no mistake between my personality and my attitude.
    My personality is who I am. My attitude depends on who you are.

  3. #3
    Join Date
    May 2018
    Posts
    30

    Re: problem mach3

    windows xp

  4. #4
    Join Date
    Apr 2005
    Posts
    304

    Cool Re: problem mach3

    Did you powered the BOB from USB or external 5V power supply?

    Attachment 417774

    BOB will not work without power

    Manual for ypur BOB in attachment
    Attached Thumbnails Attached Thumbnails ST-V2.pdf  
    Make no mistake between my personality and my attitude.
    My personality is who I am. My attitude depends on who you are.

  5. #5
    Join Date
    May 2018
    Posts
    30

    Re: problem mach3

    if I fed well
    this good configuration is possible to test
    Attached Thumbnails Attached Thumbnails Sin título.jpg  

Similar Threads

  1. Problem with Mach3
    By Moraykidz in forum Mach Software (ArtSoft software)
    Replies: 2
    Last Post: 11-27-2016, 01:10 PM
  2. MACH3 Problem
    By Olavi in forum Mach Mill
    Replies: 0
    Last Post: 12-16-2014, 08:20 AM
  3. Mach3 problem,help!
    By pajdoosijek in forum RFQ Feedback
    Replies: 1
    Last Post: 02-02-2012, 11:40 PM
  4. Mach3 problem with new cnc
    By jimmyaz in forum DIY CNC Router Table Machines
    Replies: 9
    Last Post: 06-04-2011, 12:38 PM
  5. Problem with Mach3
    By SCOTTY76SA in forum SheetCam
    Replies: 3
    Last Post: 05-27-2007, 02:34 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •