584,862 active members*
5,722 visitors online*
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Join Date
    Apr 2019
    Posts
    1

    Angry reinshaw probe problem

    I have a Mazak H600 m32 using a reinshaw probe using mazak software..works in manual mode and updates wpc but when you run can cycle such as xy center , it runs threw cycle fine but then just sits there with ready light lite and doesn't work and update wpc?? Checked all boards and macros and ok ..software issues?

  2. #2
    Join Date
    Jan 2016
    Posts
    1

    Re: reinshaw probe problem

    Martywr,
    I have the Reinshaw on a Haas, but expect that the macros are pretty much the same.
    Have you checked the memory locations for the probing result s to see if they reflect the correct data?

  3. #3
    Join Date
    Jul 2008
    Posts
    70

    Re: reinshaw probe problem

    Had a probe act up. When someone changed the batteries they held the probe and change the settings.might want to look into that.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •