We are working on a P1H from 1995. It doesn't have rigid tapping, but we do have the encoder and bracket. Anybody have the wiring diagram for hooking up the encoder? We have the plug on the head, that has the orient sensor wiring in it now, and it has all the other wires for the encoder, and the other end goes to Com2 on the computer box, which then has a ribbon cable that goes to P6 connector on the X axis card.

Also, what parameters need changing and to what once we have the encoder installed? I'll call Milltronics tomorrow as we still need the spindle pulley and a belt, but I thought I would ask here also.

Thanks!