508,286 active members
2,919 visitors online
Register for free
Login
Results 1 to 5 of 5
  1. #1
    Registered
    Join Date
    Mar 2011
    Posts
    2

    RuiDa RDC6442G X and Y out of limits

    I tried to find a solution before make the post but nothing.
    So my dsp controler display X 10000 and Y 10000
    As you uderstand when I turn it on the head moves to upper right and hits.
    I do not know how to put it back to correct settings.
    My laser is 100W 900x600

    Thanks

  2. #2
    Registered
    Join Date
    Jan 2008
    Posts
    876

    Re: RuiDa RDC6442G X and Y out of limits

    Is your homing turned on

  3. #3
    Registered
    Join Date
    Mar 2011
    Posts
    2

    Re: RuiDa RDC6442G X and Y out of limits

    yes both of themand I checked them on the dsop and the voltage is correct also.
    Somehow the laser thinks that has a table 10m x 10m

  4. #4
    Registered
    Join Date
    May 2017
    Posts
    2

    Re: RuiDa RDC6442G X and Y out of limits

    i have the same problem. Do you fixed?

  5. #5
    Hello
    I have the same problem.did you fix it ?
    Maybe you can tell me solution for it !?
    Best regards
    QUOTE=tonylgn;2135134]I tried to find a solution before make the post but nothing.
    So my dsp controler display X 10000 and Y 10000
    As you uderstand when I turn it on the head moves to upper right and hits.
    I do not know how to put it back to correct settings.
    My laser is 100W 900x600

    Thanks[/QUOTE]

Similar Threads

  1. Ruida RDC6442G LED 14 Blinking and laser will not fire
    By s1nth3sys in forum General Laser Engraving / Cutting Machine Discussion
    Replies: 22
    Last Post: 11-13-2019, 01:32 AM
  2. What is the difference between a Ruida RDC6332G and RDC6442G controller?
    By AdrianPage in forum General Laser Engraving / Cutting Machine Discussion
    Replies: 8
    Last Post: 09-07-2018, 05:42 PM
  3. Information about RuiDa RDC6442G
    By Labmaster in forum General Laser Engraving / Cutting Machine Discussion
    Replies: 15
    Last Post: 02-05-2018, 04:21 AM
  4. Ruida RDC6442G problem
    By sanyyos in forum General Laser Engraving / Cutting Machine Discussion
    Replies: 18
    Last Post: 06-24-2017, 08:01 AM
  5. What is better? Leetro 6585, Anywells AWC798C, or RuiDa RDC6442G
    By customquint in forum Laser Control Software
    Replies: 1
    Last Post: 03-10-2017, 02:10 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •