584,849 active members*
3,919 visitors online*
Register for free
Login

Thread: DM3000

Results 1 to 4 of 4
  1. #1
    Join Date
    Aug 2008
    Posts
    403

    DM3000

    I would like to run the dyna stepper driver with Mach3 looking for the pin outs for the stepper driver input and out put .Hope someone has the specs or connection document .Thanks for your help.

  2. #2
    Join Date
    Aug 2009
    Posts
    1567

    Re: DM3000

    Reverse Engineer maybe. Any good Photos of your machine ?

    Found this Thread
    https://www.cnczone.com/forums/dyna-...onversion.html
    Good luck

  3. #3
    Join Date
    Aug 2008
    Posts
    403

    Re: DM3000

    What is connected to pin 7 ?

  4. #4
    Join Date
    Aug 2008
    Posts
    403

    Re: DM3000

    Attachment 418196The distribution board out put to the stepper driver what is pin 7 ?Do I need anything besides Plus 48 and ground and the step and direction signals, and 5 volts to get motion ?

Similar Threads

  1. Dm3000 transformer
    By mike3385 in forum Dyna Mechtronics
    Replies: 0
    Last Post: 12-04-2018, 05:13 PM
  2. DM3000 NC Lathe
    By bolster55 in forum Australia, New Zealand Club House
    Replies: 0
    Last Post: 07-01-2018, 03:56 AM
  3. DM3000 Program
    By bolster55 in forum Dyna Mechtronics
    Replies: 0
    Last Post: 02-26-2016, 02:53 AM
  4. dm2400 / dm3000
    By willyh in forum Benchtop Machines
    Replies: 0
    Last Post: 09-18-2010, 09:44 PM
  5. Dyna mechtronics DM3000
    By Raskins in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 13
    Last Post: 05-07-2008, 12:26 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •