585,991 active members*
6,157 visitors online*
Register for free
Login

Thread: T01 can cycle st 0104, Meldas 50

Results 1 to 2 of 2
  1. 04-16-2019, 07:40 AM #1
    zolni
    zolni is offline Registered
    Join Date
    Mar 2012
    Posts
    2

    T01 can cycle st 0104, Meldas 50

    Dears

    I have "T01 can cycle st 0104" and this is my problem. On manual mode everything working fine, but when i set MDI mode and press for examply: S500; and press CYCLE START, on display i have error message "t01 can cycle st 0104". The same is when i try to start program from memory. I check all wirles and looks fine. ON PLC Y219 is set 0, propably should be 1
    I found propably "X26E PCNT" is set 1 and should be 0. I need to know what is PCNT, and how to turn off. I will be grate full for any help


    Best Regards
    Pawel
    Poland
    Reply With Quote Reply With Quote
  2. 05-05-2019, 03:26 PM #2
    navinbhas
    navinbhas is offline Registered
    Join Date
    Sep 2017
    Posts
    139

    Re: T01 can cycle st 0104, Meldas 50

    Attached Thumbnails Attached Thumbnails pcnt.JPG  
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Mitsubishi Meldas 600M control won't run G83 peck drill cycle
    By mscav219 in forum Mazak, Mitsubishi, Mazatrol
    Replies: 0
    Last Post: 11-08-2018, 04:30 PM
  2. problem about cycle 19 and cycle 7, machine caculated wrong offset x and z
    By diendan179 in forum HEIDENHAIN -> TNC
    Replies: 0
    Last Post: 02-02-2017, 04:08 AM
  3. CYCLE 83: pecking cycle with deepened starting point
    By Bastida in forum SIEMENS -> GENERAL
    Replies: 0
    Last Post: 12-18-2011, 04:25 PM
  4. Heidenhain iTNC 530: Using Cycle 19 and Cycle 8
    By Dan B in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 4
    Last Post: 08-27-2011, 05:32 PM
  5. Meldas 50 lathe T01 CAN'T CYCLE START 0104
    By GPena in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 8
    Last Post: 07-15-2008, 04:02 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules