Good evening everyone, I write these lines to ask for help, I have got two panasonic drivers of the EX series, very old, the driver in particular is the MSD011P1EC03, and the engine is the MSM011PJA, I have got the PDF but not much more, my problem comes in the programming of the driver since according to the instructions there is to do it under MS DOS with the RS232C protocol (besides it does not have neither keyboard nor display), besides it has cost me a lot to find out the scheme of the cable of 6 pins type RJ11 for the communication, I got the oldest version of Panaterm, the 3.70.3, but it does not work with that driver, I've even dedicated a PC just for that with Win XP, but it still does not work, to the maximum that I have arrived is that the Panaterm finds the driver, but by confirming that if I want to communicate with the communication failure and there is no possible way to enter the driver, I have read some post in this forum about this driver so I hope that someone has this program love and want to share it since Panasonic has told me they can not help me beyond Panaterm 3.70.3.
Thank you very much to all
http://www.uppic.es/images/2019/04/16/drivermotor.jpg