584,817 active members*
4,900 visitors online*
Register for free
Login

Thread: Calibration

Results 1 to 2 of 2
  1. #1
    Join Date
    Nov 2018
    Posts
    14

    Calibration

    I've retrofitted a Gerber Sabre with UC300, UB1, Gecko G320X, UCCNC with Nema 44 servo & AMT102 encoder set at 2048 PPR. My UCCNC profile attached.
    I am losing position accuracy on each of my axis. By the end of the job they have lost accurate location and hit limit switch when going back to zero.
    This is a new build and I've been guessing at my calibration for acceleration, velocity etc.
    Any advice how to calibrate for more accuracy?

  2. #2

    Re: Calibration

    It can be noise. Or are you seeing the drivers fault and not detecting the fault?

    Arturo Duncan
    https://cnc4pc.com

Similar Threads

  1. Calibration...
    By killrmodz in forum Machines running Mach Software
    Replies: 3
    Last Post: 05-12-2017, 07:35 PM
  2. Calibration
    By shtack in forum Laser Engraving / Cutting Machine General Topics
    Replies: 1
    Last Post: 11-04-2016, 05:02 PM
  3. Calibration Help
    By Jamesdee in forum Stepper Motors / Drives
    Replies: 0
    Last Post: 09-06-2015, 04:42 PM
  4. Need calibration help
    By JasonCcnc in forum DIY CNC Router Table Machines
    Replies: 2
    Last Post: 07-25-2011, 03:11 AM
  5. Calibration
    By metalfixer in forum Waterjet General Topics
    Replies: 5
    Last Post: 12-22-2008, 11:27 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •