584,837 active members*
5,526 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Mar 2008
    Posts
    114

    Spindle orientation 0imc

    Hello all, hope someone here can help. Working on a machining centre and the spindle will not orient for a tool change or m19, it just spins. The machine has beta motors and drives, and there is a prox switch connected to the spindle drive that reads a gap in a ring on the spindle. The prox is working and voltage is coming into the spindle drive but for some reason the machine doesn't see it. Any ideas?

    Sent from my G8343 using Tapatalk

  2. #2
    Join Date
    Dec 2009
    Posts
    947

    Re: Spindle orientation 0imc

    what happend before?did u canged the belts?

    go into diagnose at 445 and check by rotating the spindle with hand if the position data from 445 diagnose is same with value in parameter 4077 when the proximity sensor is on the gap,if not ,adjust by changing the value of param 4077 that is 4096/360 degrees

Similar Threads

  1. spindle orientation
    By Clyde_06 in forum Fanuc
    Replies: 3
    Last Post: 01-25-2016, 08:51 PM
  2. spindle serial link error 750 Fanuc 0IMC
    By ahmed4040 in forum Fanuc
    Replies: 0
    Last Post: 01-19-2016, 12:28 PM
  3. Spindle orientation
    By jrogus in forum Haas Mills
    Replies: 3
    Last Post: 08-23-2009, 04:18 AM
  4. Spindle orientation
    By jimecv in forum Daewoo/Doosan
    Replies: 4
    Last Post: 11-09-2007, 06:25 PM
  5. Spindle Orientation
    By machinist39 in forum Haas Mills
    Replies: 7
    Last Post: 05-05-2006, 02:58 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •