584,829 active members*
5,330 visitors online*
Register for free
Login
Results 1 to 9 of 9
  1. #1
    Join Date
    Apr 2015
    Posts
    72

    Plugin for UCCNC not showing up

    I currently have UCCNC installed but am waiting for my UC300eth to arrive before I licence it. I created a new profile. I then tried to install a plugin for my pendent by coping the shuttlepro.dll into the Plugin Directory.
    When I go in to configure the plugin, it does not show up in the list of plugins. I know the pendent works because I have it working in Mach3.

    Does UCCNC have to be licenced to install a plugin? If now any ideas as to why it does not show up in the list?

    Thanks
    Sam

  2. #2
    Join Date
    Mar 2003
    Posts
    35538

    Re: Plugin for UCCNC not showing up

    Mach3 plugins do not work in UCCNC. There is no ShuttlePro plugin for UCCNC.
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

  3. #3
    Join Date
    Apr 2015
    Posts
    72

    Re: Plugin for UCCNC not showing up

    But I just watched a video from CNCNutz with him installing the same brand of pendent (HXC - Mine is just a newer model) using the shuttlepro.dll plugin. It worked great for him.

  4. #4
    Join Date
    Apr 2015
    Posts
    72

    Re: Plugin for UCCNC not showing up


  5. #5
    Join Date
    Mar 2003
    Posts
    35538

    Re: Plugin for UCCNC not showing up

    UCCNC comes with a plugin for the XHC-HB04.
    Just scroll down like he shows in the video.

    I didn't see any mention of the shuttlepro.dll in that video.
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

  6. #6
    Join Date
    Apr 2015
    Posts
    72

    Re: Plugin for UCCNC not showing up

    I'll do a new install tomorrow. Maybe I missed something on the original.
    Thanks

  7. #7
    Join Date
    Mar 2003
    Posts
    35538

    Re: Plugin for UCCNC not showing up

    In Configure Plugins window, scroll to the bottom, and you should see the XHC-HB04 plugin.

    It's impossible to install UCCNC without the plugin, afaik.

    Check the UCCNC\Plugins folder for XHC-HB04_pendant.dll

    It should be there.
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

  8. #8
    Join Date
    Apr 2015
    Posts
    72

    Re: Plugin for UCCNC not showing up

    I did a fresh install. During the install process it asks if you have a usb controller. The first time I said no because I didn't have it connected at the time so it never showed the drivers for the XHC pendant and the xbox controller. This time I answered yes and the drivers did show up to be configured.

    Thanks for you input Gerry. I did purchase your 2017 screenset and will install that this weekend. I have been using the 2010 screenset for Mach3 for a few years now and love it.

  9. #9
    Join Date
    Mar 2003
    Posts
    35538

    Re: Plugin for UCCNC not showing up

    Answering no should have nothing to do with the installation of plugins. I always answer no during installations.
    Not sure why it didn't show up
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

Similar Threads

  1. New MODBUSEZ SetUp Plugin For UCCNC
    By Dan911 in forum UCCNC Control Software
    Replies: 189
    Last Post: 10-21-2023, 04:34 AM
  2. PCB Autoleveler Plugin for UCCNC
    By cahit in forum UCCNC Control Software
    Replies: 106
    Last Post: 11-22-2019, 01:41 PM
  3. Uccnc - plugin creation - pendant
    By robertspark in forum UCCNC Control Software
    Replies: 14
    Last Post: 09-02-2017, 09:42 AM
  4. Waiting for VistaCNC plugin for UCCNC
    By iflyinverted in forum UCCNC Control Software
    Replies: 5
    Last Post: 05-25-2016, 04:20 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •