584,858 active members*
4,742 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Uncategorised MetalWorking Machines > Traub TNM42, TX8F starting with SR=2704
Results 1 to 4 of 4
  1. #1
    Join Date
    Apr 2019
    Posts
    3

    Traub TNM42, TX8F starting with SR=2704

    Hello
    We have a Traub Tnm, TX8F and when we start the machine we receive on the screen this code: SR=2704
    Anybody can help?
    Thanks

  2. #2
    Join Date
    Apr 2019
    Posts
    3

    Re: Traub TNM42, TX8F starting with SR=2704

    hello.
    I found the reason of my error code from the screen.
    the batery from FCA320HLX-V was low.
    I found here on the forum a way to reinitialize the MC-161-1 card from the dipswitches.
    After that I can see only a screen with " MITSUBISHI CNC, MELDAS 300V SERIES, and copyright rights"
    I read something about losting system parameters after batery low.
    but i dont have floppy disk drive on my cotrol unit, or any diskette with system parameters.
    Can anibody help me please?

  3. #3
    Join Date
    May 2019
    Posts
    7
    hola
    buenas tardes,
    ami me paso el mismo problema y e encontrado algo para restablecer, el detalle esta en que mi version d eplc del medalss no me deja restablecerlo,
    en tu caso encontraste algo?

  4. #4

    Re: Traub TNM42, TX8F starting with SR=2704

    Quote Originally Posted by c14ud1u View Post
    Hello
    We have a Traub Tnm, TX8F and when we start the machine we receive on the screen this code: SR=2704
    Anybody can help?
    Thanks
    Hello, Do you have electrical diagram and ladder for this machine? I have one but with no manuals and I can´t find where the fault is.
    My email addressis [email protected]

    Share or sell, let me know please

    Thank you

    jolulank
    www.doctornumerico.com
    cnc physicians

Similar Threads

  1. Traub TND 400 TX8F
    By mlst in forum Machinery Manuals / Brochures
    Replies: 5
    Last Post: 06-06-2021, 03:18 PM
  2. Traub TNM42!
    By denilson in forum Uncategorised MetalWorking Machines
    Replies: 0
    Last Post: 12-21-2010, 04:43 PM
  3. Parameters for Traub TNM42!
    By denilson in forum Uncategorised MetalWorking Machines
    Replies: 0
    Last Post: 11-26-2010, 09:50 AM
  4. tx8f control parameters
    By ironofeden in forum German
    Replies: 0
    Last Post: 09-11-2010, 10:03 PM
  5. DND with TX8F NC power supply PD21
    By djwilly in forum Index and Traub
    Replies: 1
    Last Post: 12-15-2009, 04:36 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •