Originally Posted by
Goemon
Ok I think I made some progress. I removed all the wiring, did a factory reset and did everything again. Now, when I press "Run" the spindle starts moving although I still have some minor issues to work through. I'm not sure exactly what fixed it but I obviously made a mistake somewhere with the wiring or settings.
It seems to start at 400hz / 24,000 and it only allows me to adjust it down very slowly with the up and down arrow keys. I can't use the potentiometer to adjust the speed up or down (although the pot does seem to work for other non-related functions...).
I used the list of settings you gave me gave me when I redid the set-up. Can I adjust one of them to make it start at 12,000 or 9,000 instead of going right to top speed? And, is there a setting that allows me to adjust the speed with the pot as well as (or instead of) the arrow keys?
Thanks for the settings list. It was more useful than the entire user manual and it allowed me to redo everything very quickly.