585,665 active members*
3,336 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Okuma > HELP! Okuma OSP700M, CPU-ALARM, Bus Error Status = 80

Thread: HELP! Okuma OSP700M, CPU-ALARM, Bus Error Status = 80

Results 1 to 3 of 3
  1. 04-26-2019, 07:25 AM #1
    BoMill
    BoMill is offline
    Join Date
    Apr 2019
    Posts
    1

    HELP! Okuma OSP700M, CPU-ALARM, Bus Error Status = 80

    Hi, having big Trouble with a Okuma OPS700M System,

    It shows a CPU-Alarm Bus Error (System Bus)

    Bus Error Status(sber, sbpar, cyo, 0, prt, dia, lop, ecc) = 80

    SSW= 0165 ACCESS ADRESS = FC03DB30

    D0=00000000, D1=E03E0000 ................
    ...............................
    ..........................
    ...................
    .................
    PC=000ADE02

    can someone please help me with this Fault?
    which Board is Affected meaning ADRESS = FC03DB30 ?

    any troubleshooting help is appreciated

    Thank you
    Reply With Quote Reply With Quote
  2. 04-26-2019, 10:31 AM #2
    kurmay
    kurmay is offline Member
    Join Date
    Aug 2011
    Posts
    419

    Re: HELP! Okuma OSP700M, CPU-ALARM, Bus Error Status = 80

    it seems SVP board
    "Imagination is more important than knowledge."
    Reply With Quote Reply With Quote
  3. 01-14-2023, 06:02 PM #3
    anghell123
    anghell123 is offline Member
    Join Date
    May 2022
    Posts
    7

    Re: HELP! Okuma OSP700M, CPU-ALARM, Bus Error Status = 80

    Hi!!!
    You know which card is defective with this access address: FC1000FC
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Buying English software for Okuma LS30N and Okuma LR15 running on OSP5020L
    By thetinker09 in forum Okuma
    Replies: 0
    Last Post: 01-07-2019, 04:49 AM
  2. okuma osp 100 (okuma mh60)speicher-platine/batteriewscheel
    By joe0710 in forum Okuma
    Replies: 0
    Last Post: 04-21-2018, 06:23 AM
  3. INFO? for programming Okuma LOADERs for OKUMA LFS15-2SP ROBUSTURN TWIN SPINDLE CNC
    By ohallock in forum Okuma
    Replies: 4
    Last Post: 10-02-2014, 04:58 AM
  4. Okuma OSP3000 & Okuma DTE (data tape emulator)
    By Wade C in forum Okuma
    Replies: 2
    Last Post: 11-11-2010, 09:37 AM
  5. Anyone have a manual for a 250psi Okuma TSC pump for Okuma Mill?
    By Edster in forum Okuma
    Replies: 1
    Last Post: 08-28-2008, 02:09 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules