585,942 active members*
3,259 visitors online*
Register for free
Login
IndustryArena Forum > CNC Electronics > Gecko Drives > Gecko 201 Mounting Screws

Thread: Gecko 201 Mounting Screws

Results 1 to 3 of 3
  1. 04-26-2019, 08:36 PM #1
    distshooter
    distshooter is offline Registered
    Join Date
    Apr 2006
    Posts
    4

    Gecko 201 Mounting Screws

    How do you access (install) the Gecko 201 mounting screws located under the terminal block?
    It does not seem possible to get a tool in there with the limited clearance.
    Any advice would be appreciated.

    Thanks.
    Reply With Quote Reply With Quote
  2. 04-26-2019, 08:51 PM #2
    rcheli
    rcheli is offline Member
    Join Date
    Nov 2005
    Posts
    222

    Re: Gecko 201 Mounting Screws

    The terminal blocks are on pins and can be lifted off. Just grab the edge of the block and lift straight up.
    John
    Reply With Quote Reply With Quote
  3. 04-26-2019, 11:18 PM #3
    distshooter
    distshooter is offline Registered
    Join Date
    Apr 2006
    Posts
    4

    Re: Gecko 201 Mounting Screws

    I looked at the underside and saw solder joints. Assumed it was one piece.
    Thanks for the info. Very helpful indeed.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Nook Acme screws 1/2-5 10tpi mounting parts
    By JackMath in forum Linear and Rotary Motion
    Replies: 3
    Last Post: 10-08-2018, 10:19 AM
  2. ACME Lead screws and Mounting Hardware
    By royalcrown in forum For Sale Only
    Replies: 0
    Last Post: 05-08-2015, 01:51 AM
  3. 15mm LM guides mounting screws (Hiwin says 4mm should be enough but are they?)
    By jasminder in forum Linear and Rotary Motion
    Replies: 4
    Last Post: 10-21-2013, 08:32 PM
  4. PSU mounting screws
    By alnicov in forum Xylotex
    Replies: 0
    Last Post: 08-27-2006, 01:18 PM
  5. mounting mill sideways for cleaner screws and chips
    By lesd in forum Uncategorised MetalWorking Machines
    Replies: 1
    Last Post: 11-15-2004, 03:07 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules