584,866 active members*
5,249 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > CamWorks > Build Your Own Virtual Machine
Results 1 to 2 of 2
  1. #1
    Join Date
    Jul 2015
    Posts
    14

    Build Your Own Virtual Machine

    Hello Everyone,

    I have decided for once and for a while to dedicate every minute of my life until i have full understanding of creating virtual machines and postprocessors associated with it. I know this sounds absurd but after 2 years of wanting to know it, it is a little less absurd.
    So i have choosen CamWorks to start this with. I have some knowledge already but ofcourse far inadequate.

    My first and most important question is: Is there a tutorial somewhere on how to build a virtual machine in Camworks Virtual Machine?

    I have been looking around but couldn't find anything on how to build your own machine and set up the correct kinematics so any help of youtube links or articles would be highly appreciated.

    Hope someone has gone through the same hassle and can point me in the right direction.

    Final Goal is working postprocessors for following machines:
    4 axis XYZ gantry with rotary on spindle so XYZB machine
    4 axis mill turn XYYZ Gantry with rotary on table so XYZA machine

    Both controllers are LinuxCNC ( but thats another part, the postprocessors for it, first the virtual machine )

    Regards,

    Stephane

  2. #2
    Join Date
    Jun 2019
    Posts
    1
    Hi, I found this channel https://www.youtube.com/watch?v=m4rp9kPPK44, there are more video tutorials there, check them. And I thing virtual reality developers from https://skywell.software/virtual-reality-development/ services also can help.

Similar Threads

  1. Anyone run BCC on a Virtual Machine?
    By magicniner in forum BobCad-Cam
    Replies: 3
    Last Post: 06-22-2016, 06:03 AM
  2. New CamWorks Virtual Machine Simulator
    By RAHN1973 in forum CamWorks
    Replies: 3
    Last Post: 05-28-2014, 09:05 PM
  3. Virtual Reality and 3D Printing – Beyond Virtual Prototyping
    By cncadmin in forum 3D Printer / 3D Scanner Discussion
    Replies: 0
    Last Post: 10-16-2013, 09:30 AM
  4. Running Camsoft in a virtual machine
    By HuFlungDung in forum CamSoft Products
    Replies: 4
    Last Post: 08-21-2008, 05:28 PM
  5. Virtual Machine Shop......
    By Moondog in forum DIY CNC Router Table Machines
    Replies: 1
    Last Post: 08-24-2004, 12:04 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •