Hello,
My part was created in Solidworks in inches and I am using CamWorks for machining, but when I run post processor it changes my units from inch to metric.
Does anyone has the same problem in CamWorks?
Thanks,
tanyaber
Results 1 to 2 of 2
Threaded View
-
04-28-2019, 06:21 PM #1
Member
- Join Date
- Feb 2015
- Posts
- 5
CamWorks changes units from inch to metric during post processing
Reply With QuoteSimilar Threads
-
Drawings done in inch but post processer changes to metric
By JacobF in forum EspritReplies: 2Last Post: 07-15-2014, 04:06 PM -
How I generate post in metric not inch
By claudiu220405 in forum GibbsCAMReplies: 7Last Post: 04-28-2014, 01:47 PM -
Inch,Radius => Metric,Diameter Post Processor Convert !
By AbuTarif in forum Post Processor FilesReplies: 0Last Post: 06-21-2011, 05:48 PM -
Sprutcam post processor for metric units
By sotos in forum Syil ProductsReplies: 6Last Post: 06-07-2007, 10:15 PM -
units per inch math
By gearcut in forum Mechanical Calculations/Engineering DesignReplies: 4Last Post: 05-29-2005, 07:02 PM
Tags for this Thread
Posting Permissions
