I have a 2.2KW WJ200. I swapped my 2 pole spindle for a 4 pole spindle and need to put my WJ200 into high frequency mode. Standard mode goes to 400hz, which only gets me 12K RPM on the new spindle, but my spindle is rated to 24K RPM. I fought with the VFD for hours yesterday, tried following the manual multiple times but can't get it into high frequency mode. I have the software to plug into the VFD and use it to change parameters. But nothing I did seemed to work. I already unlocked all the settings using B037 and B031.
Does anyone know how to do this? Or who to contact to get help? The vendor I bought the VFD has never responded to any email I've ever sent them.