584,837 active members*
5,293 visitors online*
Register for free
Login
Results 1 to 4 of 4
  1. #1
    Join Date
    May 2007
    Posts
    2

    Exclamation Biesse Rover 22

    Hello all,
    We teach apprentice joiners in the Limerick Institute. As a new project I am hoping to produce a few projects for the CNC router. I need a training manual or a training workshop for the Biesse Rover 22 CNC Router. Does anyone know where I can get one or go on a training course? The suppliers can't offer a triner at the moment

    Paul

  2. #2
    Join Date
    Nov 2005
    Posts
    172

    MarkT

    I could easily offer you an online tutorial if your machine is a PC front end controller. Or, you could fly me to ireland!
    Email me at [email protected] or through my website at www.cnccustomservices.com

    Kindest Regards,

    Mark T.

  3. #3
    Join Date
    May 2007
    Posts
    2

    Biesse Rover Tutorial

    Hi Mark

    Sorry I am so late getting back to you I was on hols over the summer and then very busy getting back to work in college.
    We have started using Alpacam to run the machine instead of it's own software and are now having to sort out a few problems downloading to the machine. The PC on the machine is not connected to the web. Therefore i assume your kind offer will not be as useful as I first thought or indeed neccessary at this stage.

    thanks anyway
    Paul

  4. #4
    Join Date
    Nov 2009
    Posts
    120

Similar Threads

  1. Biesse rover 36 postprocessor
    By Ninjabiker in forum CNC Machining Centers
    Replies: 28
    Last Post: 04-14-2023, 07:05 PM
  2. Biesse Rover 335 floppy problem
    By guncha1 in forum Biesse
    Replies: 34
    Last Post: 10-16-2018, 09:42 PM
  3. Drilling section for Biesse Rover
    By NWind in forum Post Processors for MC
    Replies: 11
    Last Post: 02-23-2012, 07:51 PM
  4. Biesse Rover 20 NC410
    By Jamf2 in forum Biesse
    Replies: 22
    Last Post: 10-12-2010, 11:55 PM
  5. Rover CNC machines & ProEngineer
    By Speling in forum CNC Machining Centers
    Replies: 4
    Last Post: 10-17-2008, 02:36 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •