[jjorge88]

Hello, my name is Jorge I recently bought a cnc chiron fz 12 s No.115-90 with siemens sinumerik 810 M GA.3, the machine was working till 3 or 4 months ago but by mistake the PLC battery was removed and They have erased all the parameters of the machine, I would need the original parameters and the instructions on how to install them step by step. Thanks greetings. //////////////////Hola, mi nomre es Jorge hace poco compre un cnc chiron fz 12 s No.115-90 con siemens sinumerik 810 M GA.3 , la maquina estuvo trabajando asta hace 3 o 4 meses pero por error se saco la bateria del PLC y se han borrado todos los parametros de la maquina, me haria falta los parametros originales y las instrucciones de como instalarlos paso a paso. Gracias, un saludo

[jjorge88]

Alguien puede tener una copia de seguridad de esta maquina necesito ponerla en marcha por favor. Gracias de ante mano

[MilanNS]

send me an e-mail. I have same machine
[email protected]

[kovboyyyy]

Hello, my name is Jorge I recently bought a cnc chiron fz 12 s No.115-90 with siemens sinumerik 810 M GA.3, the machine was working till 3 or 4 months ago but by mistake the PLC battery was removed and They have erased all the parameters of the machine, I would need the original parameters and the instructions on how to install them step by step. Thanks greetings. //////////////////Hola, mi nomre es Jorge hace poco compre un cnc chiron fz 12 s No.115-90 con siemens sinumerik 810 M GA.3 , la maquina estuvo trabajando asta hace 3 o 4 meses pero por error se saco la bateria del PLC y se han borrado todos los parametros de la maquina, me haria falta los parametros originales y las instrucciones de como instalarlos paso a paso. Gracias, un saludo

is the problem solved?

[jjorge88]

is the problem solved?

hello, the problem was solved in one part in another no, the parameters of the machine TA1, TA2, PCP, PCA were loaded, but I am missing these: MPF, SPF, TOA, ZOA, RPA, SEA, and the machine cannot make a tool change I imagine it is due to lack of data .. now it only moves the axes and the spindle, but the tool cannot be changed.