Hi all,
I have a lathe and I get alarm SV0409 Detect Abnormal Torque (X).
I changed the end bearings but still I have same alarm.
I get alarm in rapid and if I change from 25% to 50% or 100% the alarm does not appear, after couple of minutes I get again same alarm.
Any help will pe apreciated.
Results 1 to 1 of 1
-
09-19-2022, 09:16 PM #1
- Join Date
- Sep 2019
- Posts
- 30
Fanuc SV0409 Detect Abnormal Torque
Reply With QuoteSimilar Threads
-
SV0441 ABNORMAL CURRENT OFSET FANUC 32I
By hodaken in forum Servo Motors / DrivesReplies: 2Last Post: 12-23-2021, 04:33 PM -
Need Help! should detect engine 3.0KW it detect as 18.5KW
By the-to in forum FanucReplies: 0Last Post: 04-09-2021, 07:18 PM -
Abnormal behaviour of Fanuc series O-M controller.
By Ihtasham141 in forum FanucReplies: 4Last Post: 09-12-2020, 12:10 AM -
Eurotech 735SL-Y (Alarm 774 SPINDLE-3 ABNORMAL TORQUE ALM)
By bnoji in forum Uncategorised MetalWorking MachinesReplies: 0Last Post: 07-31-2014, 01:31 PM -
ABNORMAL CURRENT Fanuc Servo Amplifier
By Robyr in forum Servo Motors / DrivesReplies: 15Last Post: 10-06-2013, 05:48 PM
Tags for this Thread
Posting Permissions
