584,837 active members*
5,315 visitors online*
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Join Date
    Aug 2005
    Posts
    108

    EzCad multiple pass

    Hi all,

    i use ezcad to make deep making, to do it i use: ( A ) one pass at low speed/high power 90degree + ( B ) one pass of same but 0 degree, and ( C ) one pass at hight speed/low power ( it is to clean the oxide) but need repeat it A,B,C many times. What´s happens is ,for ex. if i setup it to do A,B,C two times in looping the machine scan two times A than 2 times B than 2 times C but i need the machine scan one time A , one time B,one time C, and than repeat one time A., one time B, one time C. Do you know how to do it??

  2. #2
    Join Date
    Aug 2020
    Posts
    20

    Re: EzCad multiple pass

    Hi, for the question about ezcad2 laser marking software, you can log on to ezcad website to contact us.

  3. #3
    Join Date
    Sep 2020
    Posts
    6

    Re: EzCad multiple pass

    I am Sue from JCZ. Any questions about ezcad, you can send your questions to [email protected]. I will help to solve it.

Similar Threads

  1. EZCAD marking while rotating
    By Storen in forum Laser Engraving / Cutting Machine General Topics
    Replies: 2
    Last Post: 08-06-2018, 09:05 PM
  2. EZCad Compatibility Issues
    By amanandhislaser in forum Laser Engraving / Cutting Machine General Topics
    Replies: 2
    Last Post: 01-17-2018, 08:19 PM
  3. Cutting 1" Acrylic with Multiple Passes and each Pass is Misaligned
    By cryptodecals in forum Glass, Plastic and Stone
    Replies: 27
    Last Post: 03-05-2014, 01:30 PM
  4. Multiple pass method question...
    By alank2 in forum WoodWorking Topics
    Replies: 2
    Last Post: 04-15-2012, 01:22 PM
  5. Multiple pass stepping sideways
    By rnm85 in forum DIY CNC Router Table Machines
    Replies: 14
    Last Post: 03-24-2012, 11:33 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •